MEI Automatic Slack Adjuster to fit Sisu . Replaces Haldex 79397. Replaces OEM 5465302021.
| Haldex: | 79397 |
| OEM: | 5465302021 |
| To Fit: | Sisu |
| Supplied With: | |
| Axle Side: | |
| Other Hand: | 4W3965 |
| Offset: | +75 |
| Inclination: | 0 |
| Control Arm Angle: | 0° |
| Control Arm Type: | AP |
| Spline Teeth: | 26 |
| Clevis Bush: | 14.2 |
| Hole Centre 1 | Hole Centre 2 | Hole Centre 3 | Hole Centre 4 | Hole Centre 5 | Hole Centre 6 | Hole Centre 7 |
| 165 |
If you have any questions about this product please email our technical department.
Please note: Manufacturers' and other wholesaler's part numbers used in this catalogue are for cross reference purposes only and do not imply anything about the origin or manufacturer of the product.